- 191
- 52 418 023
Gavin Clark DIY
Australia
Приєднався 17 жов 2011
This Channel is all about my life and the things I do and make.
I like working with steel, and after many years of using an ARC welder, I now use a MIG welder for my welding projects.
I love things that fit into the "Industrial style" or "Industrial chic" which refers to an aesthetic trend in interior design that takes clues from old factories and industrial spaces.
I also do woodworking and make furniture and other projects.
I DIY because I enjoy making or fixing projects, it's less expensive and more satisfying than buying a new item.
Hope you enjoy my videos.
The tools you see in my videos are dangerous and can cause serious injury, please get the proper safety training and take precautions. Learn to use your tools safely and I wish you the best for your projects.
Link to my Channel
www.youtube.com/@GavinClarkdiy
Gavin Clark
I like working with steel, and after many years of using an ARC welder, I now use a MIG welder for my welding projects.
I love things that fit into the "Industrial style" or "Industrial chic" which refers to an aesthetic trend in interior design that takes clues from old factories and industrial spaces.
I also do woodworking and make furniture and other projects.
I DIY because I enjoy making or fixing projects, it's less expensive and more satisfying than buying a new item.
Hope you enjoy my videos.
The tools you see in my videos are dangerous and can cause serious injury, please get the proper safety training and take precautions. Learn to use your tools safely and I wish you the best for your projects.
Link to my Channel
www.youtube.com/@GavinClarkdiy
Gavin Clark
I make a Wall Mount Key Holder using Rebar, a Rusty Wrench/Spanner - Repurposed Scrap Metal Project.
In this video, I make an Industrial Style Wall Mount Key holder, using Rebar and a repurposed Rusty Wrench - Spanner, a Simple Repurposed Scrap Metal Project, and a lot of fun.
Main tools used, Welding Magnets V-Pads, MIG welder, Angle Grinder, Hammer, and a Drill.
The Small Rebar is 7mm
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Main tools used, Welding Magnets V-Pads, MIG welder, Angle Grinder, Hammer, and a Drill.
The Small Rebar is 7mm
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Переглядів: 32 379
Відео
Making a Steel Knot Metal Handle - Rebar Industrial Style Handle - Rebar Art Welding Project
Переглядів 20 тис.5 місяців тому
In this video, I make a Steel Knot Metal Handle which is an Industrial Style Metal Handle, bending rebar to make the Sheepshank knot. I love the look of industrial furniture and all the decor that comes with it, and this rebar handle has the look I like. I hope you enjoy my video of the project, it was a lot of fun to make. The main tools used, are an LPG Burner, MIG welder, angle grinder, dril...
I make Spoked Steel Wheels in an Industrial Style, using Rebar for the Spokes - Rebar Project
Переглядів 614 тис.8 місяців тому
I make Spoked Steel Wheels in an Industrial Style, using Rebar for the Spokes. I love anything industrial and if it has rebar in it then it is even better, and this project is one of my favorites, maybe because of the bit where I bend the flat bar into rings, using just a hammer, I have done this before, but I have never tried to video it before. It was a fun rebar project to make and I hope yo...
Bending Flat Bar into Rings using a Hammer and Rail Track - 50mm x 6mm (2" x 1/4" )Flat bar.
Переглядів 35 тис.8 місяців тому
Bending Flat Bar into Rings using a Hammer and Rail Track - 50mm x 6mm (2" x 1/4" )Flat bar. I am making these flat bar rings as I needed the rings to put on some steel wheel hubs I have made, this will give the project the exact look I wanted, although I do not make the wheels in the video, there is a photo of the finished wheel, at the end of the video. I just love the rustic look of hammered...
Cooking Breakfast on the Metal Outdoor Fire pit I made on this channel.
Переглядів 25 тис.10 місяців тому
Cooking Breakfast on the Metal Outdoor Firepit which I made on this channel. I made this Metal Firepit for Campfire and Dutch Oven Cooking with a Swinging Pot Hanger, and since I have uploaded the video I had quite a few comments from people wanting to see it in use, and to see how it works. So I made this quick video and I hope it explains how it could be used, how we cook on it, and use it as...
I make a Campfire Tripod - Heating Steel Rebar with a Handheld Gas Burner Torch.
Переглядів 412 тис.11 місяців тому
I make a Campfire Tripod - Heating Steel Rebar with a Handheld Propane LPG Gas Burner Torch. Because I was using 5/8 inch (16mm) Rebar I needed to use a gas burner torch to heat the steel so I could bend it. I enjoy doing blacksmithing-type jobs, it was a very peaceful DIY project, with nowhere near the amount of noise I normally make. We do quite a bit of outdoor campfire or fireplace cooking ...
I make a Large Rebar Industrial Style Handle - Door Pull Handle - 325mm (12 3/4 inches) Long.
Переглядів 276 тис.Рік тому
I make a Large Rebar Industrial Style Handle - Door Pull Handle - 325mm long (12 3/4inches) I use steel rebar to make a large Industrial Style Metal Handle using two different sizes of rebar, This is a large handle for quite a big door, I love the look of industrial furniture and all the decor that comes with it, and this handle has the look I like. I hope you enjoy my video of the rebar handle...
I make a Wall Mount, Metalworking File Tool Rack, for the tool cabinet.
Переглядів 79 тис.Рік тому
I make a Wall Mount, Metalworking File Tool Rack, for the tool cabinet. I love these little welding projects, I will make more tool racks for other tools at some stage, sticking to the industrial-style look I like. The "Link" to the making of the Tool Wall Cabinet: ua-cam.com/video/PYKxMC-awwg/v-deo.html The main tools used were a MIG welder, angle grinder, drill, and bench vise. This video is ...
Splinter Removal - Steel Wire Splinter
Переглядів 16 тис.Рік тому
Splinter Removal - Steel Wire Splinter. I got this splinter in my arm when using a cup-type wire brush on an angle grinder, the wires sometimes, when under load become loose and fly off, this is where the personal safety gear is well and truly needed. All is good, that wound will heal on my arm very nicely, I am sure. Always use all the correct safety gear, and use your tools safely, I am not a...
I make an Industrial-Style Heavy-Duty Steel Workbench and Welding Table.
Переглядів 284 тис.Рік тому
I make an Industrial-Style Heavy-Duty Steel Workbench and Welding Table, for my workshop. Using steel beams and bolts that give that real Industrial Style look I like, and I have used it all in this workbench build, I even salvaged some steel from a metal staircase and other things and repurposed it to use in this workbench. This keeps the cost down. I enjoyed this metalworking project and I th...
I make a Metal Firepit for Campfire and Dutch Oven Cooking with a Swinging Pot Hanger.
Переглядів 1,3 млнРік тому
I make a Metal Firepit to do Campfire and Dutch oven cooking with a swinging pot hanger - repurpose Scrap Metal Project. I repurpose old rusty scrap metal, to make an outdoor cook station with a swinging pot hanger and my rebar crossbar with hooks and 4 loose butcher hooks also. We love open-fire cooking and Dutch oven cooking when we are camping, and now with this metal firepit cooking setup, ...
From Blue Sky to Storm Time-lapse Video Albury, NSW, 6th Nov 2022, from 11.30 am
Переглядів 5 тис.Рік тому
Storm Time-lapse Video Albury NSW 6th Nov 2022, from 11.30 am. Everything in this video happened within about 3 hours. (I found the dirt on the Lens after I finished - I am very sorry) I filmed this on a Canon M6 mk2 camera, and I found I had dirt on the lens after filming. Lesson learned, Check the camera, no matter how fast I need to film, I messed up a good video. Filming Equipment used in t...
I make Bookends from Old Railroad Track - using an Angle Grinder.
Переглядів 19 тис.Рік тому
I make Bookends from Old Railroad Track for a bookcase by cutting two pieces of railway track on an angle using a 9-inch angle grinder, This was a good metalworking project for me, I totally enjoyed doing this, it was one of those simple jobs I like, putting something on the workbench cutting some stuff off it, and cleaning it up a bit, and the job is done. Hahaha, Good times. I hope you enjoy ...
EcoFlow Delta Max 2000 & 220w Solar Panel Review - Using Power tools with the Delta Max.
Переглядів 7 тис.Рік тому
EcoFlowDelta Max 2000 Review and 220w Solar Panel Review. I test the Delta Max by using it to run my power tools, angle grinders both big and small. EcoFlow Delta Max - (Sponsored link) au.ecoflow.com/products/delta-max-portable-power-station?variant=41762129150150&aff=9 www.amazon.com.au/dp/B09ZV36ZWS?ref=myi_title_dp I then make a set of Bookends for a bookcase out of Railway Track by cutting...
I turn a Railroad Track into an Anvil - using an Angle Grinder.
Переглядів 4,3 млнРік тому
In this video, I turn a Railroad Track into an Anvil using an Angle Grinder. This was a good metalworking project for me, I totally enjoyed doing this, it was one of those simple jobs I like, putting something on the workbench cutting some stuff off it, and cleaning it up a bit, and the job is done. Hahaha, Good times. I hope you enjoy my video of making an Anvil from a railway track. The finis...
I make an Industrial Style Shelf Bracket, and bend Steel Rebar into a knot - MIG Welding Project
Переглядів 3 млнРік тому
I make an Industrial Style Shelf Bracket, and bend Steel Rebar into a knot - MIG Welding Project
Making a Door Knocker using Rebar - Rebar Project
Переглядів 911 тис.Рік тому
Making a Door Knocker using Rebar - Rebar Project
DIY Rebar Bottle Opener - Rebar Projects
Переглядів 32 тис.2 роки тому
DIY Rebar Bottle Opener - Rebar Projects
I make a Sheepshank Knot by Bending Rebar - Rebar Metal Art Project.
Переглядів 16 тис.2 роки тому
I make a Sheepshank Knot by Bending Rebar - Rebar Metal Art Project.
I make a Custom Rebar Hammer - Weighs 6.3 KG (13.9 Pounds) Steel Wedge in Handle - Welding Project
Переглядів 1,8 млн2 роки тому
I make a Custom Rebar Hammer - Weighs 6.3 KG (13.9 Pounds) Steel Wedge in Handle - Welding Project
I Make an Industrial Style Wall Coat Hooks using Large Nails and Rebar - MIG Welding Project
Переглядів 58 тис.2 роки тому
I Make an Industrial Style Wall Coat Hooks using Large Nails and Rebar - MIG Welding Project
I make a Steel Knot by Bending Rebar - Reef Knot - without Heating, Metal Art Project
Переглядів 75 тис.2 роки тому
I make a Steel Knot by Bending Rebar - Reef Knot - without Heating, Metal Art Project
I make a Steel Knot by Bending Rebar - Bowline Knot - without Heating, Metal Art Project
Переглядів 49 тис.2 роки тому
I make a Steel Knot by Bending Rebar - Bowline Knot - without Heating, Metal Art Project
I make a Steel Knot by Bending Rebar - Clove Hitch Knot - without Heating, Metal Art Project
Переглядів 9 млн2 роки тому
I make a Steel Knot by Bending Rebar - Clove Hitch Knot - without Heating, Metal Art Project
I Restore an Old Bench Vice - Vise, as a gift for my Grandson.
Переглядів 14 тис.2 роки тому
I Restore an Old Bench Vice - Vise, as a gift for my Grandson.
I make an Industrial Style Wall Coat Rack using Tow Hooks and Rebar.
Переглядів 379 тис.2 роки тому
I make an Industrial Style Wall Coat Rack using Tow Hooks and Rebar.
I make an Industrial Style Wall Coat Hook using Rebar - R.M.Williams Belt Project.
Переглядів 465 тис.2 роки тому
I make an Industrial Style Wall Coat Hook using Rebar - R.M.Williams Belt Project.
I make an Industrial Design Style Coat Hanger using Steel Rebar Rod - MIG Welder Project
Переглядів 17 тис.2 роки тому
I make an Industrial Design Style Coat Hanger using Steel Rebar Rod - MIG Welder Project
I make a Steel Rebar Industrial Style Handle, using two different size Rebar.
Переглядів 412 тис.2 роки тому
I make a Steel Rebar Industrial Style Handle, using two different size Rebar.
I make an Industrial Style Wall Key Holder made from metal Rebar - MIG Welding Project
Переглядів 327 тис.2 роки тому
I make an Industrial Style Wall Key Holder made from metal Rebar - MIG Welding Project
Any keepers???
🤝🤝🤝I'm a perfectionist too. Everything is very neat. Well done👍👍👍👍👍
Okعالی
خیلی خوب❤
Grande maestro,un abrazo desde Chile muy lindo trabajo
Молодец, интересно смотреть. Даже кое чему научиться можно. Спасибо.
Half inch rebah
Now that"s craftsmanship? I'm inspired...
Сразу лайк Кевин плохого не покажет!!!!!
Love it! and one of my "gotta try that" things.... How about adding Hardy/Pritchell holes and make drifts/inserts with the cutoff pieces? 🙂
That is not an anvil.... It's a work of art love it....I just need to know how long did it take and do you know the # of disk it tool Be well and be safe ..........P.S. did say i LOVE IT.🦜
Hbb
ахуеть ??? АХУЕТЬ !!! как говорит мой один знакомый ...
Симпатично! Вот только жалко, что ржаветь будет, а если покрасить, то не так симпатично будет.
Is dat staal wel sterk genoeg als aambeeld?
Кевин привет!!!!! Как всегда шедевр!!!! Спасибо за ролик, вдохновляет!!!!
Nice 👍
Was look at that you actually followed the directions in the video. I made it exact replica of KipKay’s DIY outdoor kerplunk.
A work of art 😍😍😍
Nice piece, mate. How much time did it take you to complete the job?
Стол вероятно доживет до следующего тысячелетия!
.....sooooo nice made !!! BIG COMPLIMENT !! Thank YOU very much !!! Kinde regards from Switzerland !!
That’s a piece of art dude.
Gavin, suas peças são bonitas , é possível viver só desse trabalho ?
G'day Gavin. Enjoy your channel mate. Wanting to have a crack at some of your projects but cannot find 7mm rebar anywhere in Queensland. Any tips where to look please.
How much would you charge to make me one?
what a waste of time
Szépségesen szép lett.Köszönöm a videót.
You are a master !!,my respects!!,🔴🫢🤫 6:10
Outstanding video and craftsmanship. Thanks for sharing.
Buen trabajo, solo un alcanse, el aro deberia hacerlo sin perder material, bastaria cortar el largo justo. Le envio un cordial saludo.
Good Work magnifique and thanks.
Um abraço de são paulo brasil !
Добрый день. Вы можете написать все размеры этого?
For the next video use a file :) Amazing craftsmanship!
Belo trabalho, parabéns.
Incrível. muito criativo.
An anvil should'nt be hardened in surface ?. otherwise the iron is soft and will be damaged fast
Crafty knowledge at its finest!
Parabéns belo trabalho
I would be down with a set of these for my DIY tool chest instead of inflatable tires. Theyd look exo on the big chunky coffee table too.
I'm a 69-year-old Japanese man with the same hobby who always looks forward to your videos. I'm thinking of making a treasure chest for my grandchildren to enjoy.
बहोत अछा बनावट करते हो.❤
Watch horinand rangis great adventures
Absolutely beautiful only negative thing is why so low I would think waist height would be so much more workable and comfortable good job mate
Gday Gav! Thanks again for the tutorial. I’ve gotta ask ya mate, how many hours did that project take?? I’m trying to make one at home with piece of railroad and it is taking so F’ing long! I’ve been through about 8 cutting discs already and I’m beginning to wonder whether it’s worth the time. The money I could be making by making other things means I could just buy one! I don’t just want to abandon it now though.
OMG! what two year old boy WOULDN'T be absolutely thrilled to have this bed! Ollie will remember getting this bed for the rest of his life!
👍👍👍👍👍
👍👍👍
👍👍👍